RC Probleme

    ACHTUNG: Mit der neuen EU Drohnenverordnung muß sich jeder Drohnen-Betreiber beim Luftfahrtbundesamt registrieren und seine Drohne mit der e-ID kennzeichnen! Ein passendes Kennzeichen bekommst Du hier im Shop. Außerdem benötigst Du eine Drohnen-Versicherung. Hier geht es zu unserem Drohnen-Versicherungsvergleich. Informationen zum neuen EU Drohnenführerschein gibt es hier.

    • Moin Leute,

      ich bin neu hier und direkt am verzweifeln. Ich habe bei meinem P3P auf Firmware v1.11.20 geupdatet und nun leuchtet dieser nur noch Gelb bzw. Blinkt und die RC Leuchtet durchweg Rot und in der DJI App (iOs) bekomme ich nicht mal den Kameramodus angeboten sondern nur Start mit einer anschliessenden Hilfe Seite. Ich habe nun viel gelesen, von Downgrade, über Koppeln welches nicht ging über Reste RC etc. Daher meine Frage kann mir jemand Step by Step helfen?

      Der Support naja sagen wir so da erhoffe ich mir hier mehr Hilfe.

      Vielen Dank im voraus

      Gruß Denni

      Hier die aktuelle Log-File

      Quellcode

      1. ========== 2014.01.01 00:00:12 remo-con disconnect======
      2. Packet: P3X_FW_V01.03.0020.bin
      3. Result: Failed.
      4. Reboot the aircraft and try to upgrade the firmware again.
      5. ========== 2014.01.01 00:00:12 remo-con disconnect======
      6. Packet: P3X_FW_V01.05.0030.bin
      7. Upgrading ...
      8. Result: Success.
      9. ========== 2016.01.05 18:18:31 =====================
      10. Packet: P3X_FW_V01.06.0040.bin
      11. Upgrading ...
      12. Result: Success.
      13. ========== 2014.01.01 00:00:12 remo-con disconnect======
      14. Packet: P3X_FW_V01.06.0040.bin
      15. Result: Abort.
      16. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      17. ========== 2014.01.01 00:00:12 remo-con disconnect======
      18. Packet: P3X_FW_V01.09.0060.bin
      19. Upgrading ...
      20. Result: Success.
      21. ========== 2014.01.01 00:00:12 remo-con disconnect======
      22. Packet: P3X_FW_V01.11.0020.bin
      23. Upgrading ...
      24. Result: Success.
      25. ========== 2014.01.01 00:00:12 remo-con disconnect======
      26. Packet: P3X_FW_V01.11.0020.bin
      27. Result: Abort.
      28. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      29. ========== 2014.01.01 00:00:12 remo-con disconnect======
      30. Packet: P3X_FW_V01.11.0020.bin
      31. Result: Abort.
      32. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      33. ========== 2014.01.01 00:00:12 remo-con disconnect======
      34. Packet: P3X_FW_V01.11.0020.bin
      35. Result: Abort.
      36. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      37. ========== 2014.01.01 00:00:12 remo-con disconnect======
      38. Packet: P3X_FW_V01.11.0020.bin
      39. Result: Abort.
      40. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      41. ========== 2014.01.01 00:00:12 remo-con disconnect======
      42. Packet: P3X_FW_V01.11.0020.bin
      43. Result: Abort.
      44. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      45. ========== 2014.01.01 00:00:12 remo-con disconnect======
      46. Packet: P3X_FW_V01.11.0020.bin
      47. Result: Abort.
      48. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      49. ========== 2014.01.01 00:00:12 remo-con disconnect======
      50. Packet: P3X_FW_V01.11.0020.bin
      51. Result: Abort.
      52. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      53. ========== 2014.01.01 00:00:13 remo-con disconnect======
      54. Packet: P3X_FW_V01.11.0020.bin
      55. Result: Abort.
      56. The firmware on the SD card is identical to or older than the current firmware on the aircraft.
      57. ========== 2014.01.01 00:00:13 remo-con disconnect======
      58. Packet: P3X_FW_V01.03.0020.bin
      59. Result: Abort.
      60. The current firmware does not support downgrade. Use a different version of firmware to downgrade the target version.
      Alles anzeigen
    • Kenne dieses Problem!
      Da hat sich die Firmware der Lightbridge verabschiedet. Ein automatisches reflashen ist nicht möglich. Du musst die Fernsteuerung aufmachen und auf dem kleinen Modul wo der USB-Port dran ist die Firmware manuell mittels Terminal neu einspielen.

      Bist Du technisch versiert? Wenn ja, kann ich Dir gerne weitere Erklärungen dazu geben.
      Wenn nicht, kann ich Dir anbieten Deine Fernsteuerung zu reparieren.

      Gruss Matthias