Moin Leute,
ich bin neu hier und direkt am verzweifeln. Ich habe bei meinem P3P auf Firmware v1.11.20 geupdatet und nun leuchtet dieser nur noch Gelb bzw. Blinkt und die RC Leuchtet durchweg Rot und in der DJI App (iOs) bekomme ich nicht mal den Kameramodus angeboten sondern nur Start mit einer anschliessenden Hilfe Seite. Ich habe nun viel gelesen, von Downgrade, über Koppeln welches nicht ging über Reste RC etc. Daher meine Frage kann mir jemand Step by Step helfen?
Der Support naja sagen wir so da erhoffe ich mir hier mehr Hilfe.
Vielen Dank im voraus
Gruß Denni
Hier die aktuelle Log-File
Alles anzeigen
ich bin neu hier und direkt am verzweifeln. Ich habe bei meinem P3P auf Firmware v1.11.20 geupdatet und nun leuchtet dieser nur noch Gelb bzw. Blinkt und die RC Leuchtet durchweg Rot und in der DJI App (iOs) bekomme ich nicht mal den Kameramodus angeboten sondern nur Start mit einer anschliessenden Hilfe Seite. Ich habe nun viel gelesen, von Downgrade, über Koppeln welches nicht ging über Reste RC etc. Daher meine Frage kann mir jemand Step by Step helfen?
Der Support naja sagen wir so da erhoffe ich mir hier mehr Hilfe.
Vielen Dank im voraus
Gruß Denni
Hier die aktuelle Log-File
Quellcode
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.03.0020.bin
- Result: Failed.
- Reboot the aircraft and try to upgrade the firmware again.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.05.0030.bin
- Upgrading ...
- Result: Success.
- ========== 2016.01.05 18:18:31 =====================
- Packet: P3X_FW_V01.06.0040.bin
- Upgrading ...
- Result: Success.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.06.0040.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.09.0060.bin
- Upgrading ...
- Result: Success.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Upgrading ...
- Result: Success.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:12 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:13 remo-con disconnect======
- Packet: P3X_FW_V01.11.0020.bin
- Result: Abort.
- The firmware on the SD card is identical to or older than the current firmware on the aircraft.
- ========== 2014.01.01 00:00:13 remo-con disconnect======
- Packet: P3X_FW_V01.03.0020.bin
- Result: Abort.
- The current firmware does not support downgrade. Use a different version of firmware to downgrade the target version.