Hi zusammen,
habe mir etwas Gedanken zu meinem Projekt Quadrocopter Eigenbau (Anfänger) gemacht.
Ich würde gerne eine Action Cam (SJCAM SJ4000 - ca. 64g + Gehäuse) dran hängen können,
FPV is vielleicht irgendwann auch mal nett muss aber am Anfang nicht sein.
Flight Controller 24g
MultiWii PRO Flight Controller w/MTK GPS Module - € 60,-
Specs:
(MultiWii PRO)Mounting: Standard Mk style mounting holes 45mm X 45mmDimensions: 70x50x12mm
Weight: 16g
(MTK 3329 GPS module)Position Accuracy: < 3m CEP (50%) without SA (horizontal)Cold Start: under 35 seconds (Typical)
Warm Start: under 34 seconds (Typical)
Hot Start: under 1 second (Typical)Power Consumption: 48mA @ acquisition, 37mA @ tracking
Shut-down current consumption: 15uA, typical
Dimensions: 30x26x7mm
Weight: 8g
4 Motoren: Gesamt 208g
4x D2830-11 1000kv Brushless Motor - je € 9.45,-
Motoren:
Specs:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm
4 Regler (ESC): Gesamt 188g
4x Hobby King 30A ESC 3A UBEC - je € 8.59,-
Specs:
Constant Current: 30A
Burst Current: 40A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 32g
Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
4 Props: 180-240g
6x 8045 SF Props 2pc CW 2 pc CCW Rotation (Green) - je € 2.40,-
oder
10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation - natürlich 2 rechts/2 links
oder
9x4.7 SF Props 4pc Standard Rotation
Fernbedienung:
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) - € 51.59,-
Number of Channnel: 8ch ppm/9ch pcm
Display: 128*64LCD
Support Type: Heli/Acro/Glid
Support user: 8
Stick model: 4
Encoder type: ppm/pcm
Subtrim: Yes
Simulator Interface: Yes
Buzzer: Yes
Low Voltage Show: Yes
Required:
Battery
Included:
Turnigy 9x 9Ch Transmitter
Turnigy RF9X-V2 module
Turnigy 9X8C-V2 8-channel receiver
Frame ist mir noch nicht ganz klar, entweder was fertiges oder Alu Profile
Was würdet Ihr mir denn für ein LiPo empfehlen ?
Würdet Ihr andere Komponenten verbauen (in dem Preissegment) ?
Hab ich was vergessen ?
Es gibt natürlich immer bessere Komponenten, am Anfang möchte ich aber noch nicht soviel Geld in die Hand nehmen um erst mal zu sehen ob das was für mich ist.
Gruß Jörg
habe mir etwas Gedanken zu meinem Projekt Quadrocopter Eigenbau (Anfänger) gemacht.
Ich würde gerne eine Action Cam (SJCAM SJ4000 - ca. 64g + Gehäuse) dran hängen können,
FPV is vielleicht irgendwann auch mal nett muss aber am Anfang nicht sein.
Flight Controller 24g
MultiWii PRO Flight Controller w/MTK GPS Module - € 60,-
Specs:
(MultiWii PRO)Mounting: Standard Mk style mounting holes 45mm X 45mmDimensions: 70x50x12mm
Weight: 16g
(MTK 3329 GPS module)Position Accuracy: < 3m CEP (50%) without SA (horizontal)Cold Start: under 35 seconds (Typical)
Warm Start: under 34 seconds (Typical)
Hot Start: under 1 second (Typical)Power Consumption: 48mA @ acquisition, 37mA @ tracking
Shut-down current consumption: 15uA, typical
Dimensions: 30x26x7mm
Weight: 8g
4 Motoren: Gesamt 208g
4x D2830-11 1000kv Brushless Motor - je € 9.45,-
Motoren:
Specs:
Rpm/V: 1000kv
Shaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)
Weight: 52g
Watts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm
4 Regler (ESC): Gesamt 188g
4x Hobby King 30A ESC 3A UBEC - je € 8.59,-
Specs:
Constant Current: 30A
Burst Current: 40A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 32g
Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
4 Props: 180-240g
6x 8045 SF Props 2pc CW 2 pc CCW Rotation (Green) - je € 2.40,-
oder
10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation - natürlich 2 rechts/2 links
oder
9x4.7 SF Props 4pc Standard Rotation
Fernbedienung:
Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) - € 51.59,-
Number of Channnel: 8ch ppm/9ch pcm
Display: 128*64LCD
Support Type: Heli/Acro/Glid
Support user: 8
Stick model: 4
Encoder type: ppm/pcm
Subtrim: Yes
Simulator Interface: Yes
Buzzer: Yes
Low Voltage Show: Yes
Required:
Battery
Included:
Turnigy 9x 9Ch Transmitter
Turnigy RF9X-V2 module
Turnigy 9X8C-V2 8-channel receiver
Frame ist mir noch nicht ganz klar, entweder was fertiges oder Alu Profile
Was würdet Ihr mir denn für ein LiPo empfehlen ?
Würdet Ihr andere Komponenten verbauen (in dem Preissegment) ?
Hab ich was vergessen ?
Es gibt natürlich immer bessere Komponenten, am Anfang möchte ich aber noch nicht soviel Geld in die Hand nehmen um erst mal zu sehen ob das was für mich ist.
Gruß Jörg
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Musicman ()