Hermit 145er Liga, Brushless - OverskyRC - 1 x FPV, 1x normal, 1 x SuperX alle RTF +1,5x LKTR120 - Marktplatz - Drohnen-Forum.de

Preisvorstellung / Gegenleistung:
333,00
Erledigt

christian4FPV 23. Juli 2017, 17:06 (Gültig bis: 21. September 2017)

Zuerst auf derPlattform der Gleichgesinnten…
Indoor und OutdoorFPV Sets - 4 Copter RTF mit Funke für 333€ anstelle von 1500€
Es gibt einen Punktan dem ich sagen muß - OK diese Kopter liegen nur mehr rum als dass diesefliegen - und da 4 Kopter auf der gleichen Funkte hängen (OrangeRC) gibt es nurentweder alle oder keinen! ...und ganz ehrlich... der Hermit ist mir zu "scharf", so gut klappt es dann doch noch nicht...

Also ich verkaufehier folgende Copter:
1 x OverskyRC HermitFPV
1 x OverskyRC Hermit
1 x SuperX
1 x LKTR120 - Indoor - fliegt, jedoch sehr lahm

0,5 x LKTR120 FPV -nach Absturz in Teilen
1 x OrangeTX Funke
Sowie Akku's füralle 3 Kopter Modell (jeweils mindesten 3x)
Und sovielePropeller und Ersatzteile dass ich diese nicht mehr aufzähle… siehe Bilder
Festpreis 333Euro -per paypal
Ohne Versandkosteninnerhalb von D
Warum ich den jetztzu einem so fairen Preis abgebe?
Wie eingangsbeschrieben ist dieses Paket abhängig von dem OrangeTX DSM2 spezifischenProtokoll (NICHT Spektrum kompatibel) - und daher schweren Herzens - alle oderkeiner.
Und anstelle weiterim Schrank zu "gammeln" - gebe ich diesen jetzt lieber zu einemfairen Preis ab und jemand anders hat Spaß daran.
Bei Interessen bittePN. Aktuelle Bilder in der Anlage.
Gruß vom Bodensee
Christian
BeschreibungOverskyRC:
Hermit

Hermit Micro FPV brushless quadcopter 145mm 98g! fully assembled
$348.00
Hermit 145 is a newly designed micro FPV quad copter, only 140mm motor to motor size can it fly in the narrower and confined space easily. Although it is very small, it can install a 5.8G video transmitter(VTX), a DV of 120-angle lens, a flight control board integrated with receiver, OSD (option) and so on. Besides, you can adjust the distance of motor to motor through the frame, and the view angle of DV is adjustable too.
This product comes in fully assembled
Features:
1） Weight: 67g (not including battery)
2） Flight weight: 98.0g (450mAh 25C7.4V)
3） Flight time: 9 minutes ( with 2S 450mAh 25C battery, VTX and DV on working)
4） Motor to motor distance: 145mm, 150mm, 155mm adjustable;
5） View angle of DV is +/- 25 angle adjustable;
6） Applied high efficiency brushless motor, its weight is 3g, KV is 4000;
7） Applied micro 5.8G VTX (200MW) comes with clover antenna, only 6.0 grams;
8） Applied super light DV, it is 720P/30F and with 120-angle lens, it supports real time AV output, its Micro SD can support 32G at the most, Micro SD is not included.
9） Integrated with DSM2 compatible 7CH receiver;
Hermit 145 compared with R7008SB receiver on size:

Supply way：KIT；
Included in box：
1） One set of Hermit 145 frame
2） MP03 brushless motor : 4 pcs (weight is 3g, 4000KV, with 1.5mm shaft)
3） Mu-3A ESC: 4 pcs;
4） 2 sets of propeller (8 props)
5） One piece of MX-VTX-B with clover antenna;
6） One set of MINI DV（720P/30F，120-angle lens）
7） One piece of MX OVERSKY 32 flight control board (integrated with DSM2 7CH receiver, supports firmware of BaseFlight and CleanFlight)
8） 1 pcs of 450mAh25C7.4V battery;
Note:
1) The integrated DSM2 compatible 7CH receiver outputs data through serial port;
2) It supports outside receivers such as PPM, DSM2/DSMX, SUMD or SBUS (revert circuit needs to be added)
3) You can also choose Mu-3Aa-L1 which was installed on the motor carbon arm(only for 150mm and 155mm motor to motor distance);
4) MX NANO CC3D flight control is an option;
5) The max flying weight should not be more than 120g
6) 99% of the quadcopter was designed for plug and play, no need more solder, but for power cable, customer need to solder it themselves.
7) We can provide both RHCP and LHCP clover antenna, please let us know which one your prefer when you make the order.
Binding operation:
1) Press the binding switch on the receiver (green LED is on),then power FC board, release the binding switch, the green LED on the receiver flashes quickly (the receiver enters binding mode);
2) Press the binding switch on the DSM2 transmitter and then turn on the power;
3) When the fast flashing LED on the receiver is off and then comes to bright constantly, it indicates the binding is succeed, or repeat the above process.
Unlock operation:
Throttle to THR, Elevator to PITCH, Aileron to ROLL, Rudder to YAW
Unlocking: pull the throttle to the lowest, turn YAW to the right end (if it is still unlocking, please set range of YAW and THR to 120%, and check the channel direction and then try)

Aus <overskyrc.com/hermit-micro-fpv…8f7fd6c3a7f0c726626a608fa>
LKTR120:

LKTR120 V2 FPV quadcopter fully assembled 77g!

$289.00

Description:

Flight weight: 77g including all the parts fully assembled, motor to motor distance is 120mm.

Flight time is about 10 minutes with 300mAh7.4V35C battery.

The frame is redesigned on the base of original LKTR120, so it can fit our 1280*720P/30 camera perfectly, the standoffs is aluminum made 14mm one, stronger and light.

Included in box：

1） One set of LKTR120 V2 frame

2） DP03 6500KV brushless motor : 4 pcs (weight is 3g, 6500KV, with 1.5mm shaft)

3） MP-7A ESC: 4 pcs;

4） 2 sets of 56mm propeller (8 props)

5） One piece of MX-VTX-B with clover antenna;

6） One set of MINI DV（720P/30F，120-angle lens）

7） One piece of MX OVERSKY 32 flight control board (integrated with DSM2 7CH receiver, supports firmware of BaseFlight and CleanFlight)

8） 1 pcs of 300mAh25C7.4V battery;

Binding operation:

1) Press the binding switch on the receiver (green LED is on),then power FC board, release the binding switch, the red LED on the receiver flashes quickly (the receiver enters binding mode);

2) Press the binding switch on the DSM2 transmitter and then turn on the power;

3) When the fast flashing red LED on the receiver is off and then comes to bright constantly, it indicates the binding is succeed, or repeat the above process.

Unlock operation:

Throttle to THR, Elevator to PITCH, Aileron to ROLL, Rudder to YAW

Unlocking: pull the throttle to the lowest, turn YAW to the right end (if it is still unlocking, please set range of YAW and THR to 120%, and check the channel direction and then try)

Aus <overskyrc.com/lktr120-v2-fpv-q…-assembled-77g-p-683.html>
SuperX

Super-X micro brushless quadcopter
Super-X is one of the lightest and smallest brushless quadcopter on the market. It is installed MX NANO OVERSKY 32 type X flight control board (integrated with DSM2 receiver), it comes with 4 set of brushless power system providing double thrust of its own weight, so it is easy for 3D flying or installing FPV system etc.
Its size is so small that it can hover easily indoor.
Super-X features:
Distance of wheelbase: 125mm
Weight:38.2g (not including battery), 49.5g (including one 400mAh3.7V battery)
Propeller diameter:75mm
Brushless motor: MR-03-H (3g, 6400KV)
Speed control: MX-3A (0.36g, 3a)
MX NANO OVERSKY 32 type X flight control board (integrated with DSM2 receiver)
Flight time: 8 minutes (1s 300mAH/25C lipo) 10 minutes (1S 400mAh/25C lipo) 12 minutes (1S 600mAh/25c lipo)
Note: The flying time was tested indoor and the flight weight was 38.2g (not including the battery weight). The actual flying time will be different according to the change of environment and load.

Aus <overskyrc.com/superx-micro-brushless-quadcopter-p-507.html>
Funke:

T-SIX 2.4GHz DSM2 Compatible 6CH Transmitter w/10 Model Memory

$66.90

This transmitter can work with our quadcopters such as: Hermit quadcopter, Super-X quadcopter, LKTR120 quadcopter, very good performance according to our test! customers who buy our quadcopter can also buy this transmitter!

Features:

• Compatible with all DSM2 Receivers

• 6 Channel Operation

• Supports 3 Wing/Tail Mixes (Dual Aileron/Elevon/V-Tail)

• Supports 2 Swashplate Types (1 Servo 90°/CCPM 120°)

• 5 Point Graphic Pitch/Throttle Curves

• Adjustable Gyro Gain

• Dual Rates and Exponential

• Servo Reversing (all 6 channels)

• Channel Mixing

• Sub Trim and Travel Adjust

• Flaps and Differential

• Throttle Hold

• Large Backlit LCD Display

• 10 Model Memory

• Adjustable RF Power Output (US and EU Selectable via Menu)

• Integrated Timer

• Adjustable Stick Length

• Trainer Port

• Supports Alkaline, NiMH, NiCd, LiPo and LiFe batteries

Specs:

Frequency: 2.4GHz

Modulation: DSM2

No. of Channels: 6

Model Memory: 10

Stick Mode: Mode II (left stick throttle)

Includes:

OrangeRx T-SIX 2.4GHz DSM2 Compatible 6CH Programmable Transmitter (Mode 1 version)

User Manual

Requires:

2.4GHz DSM2 compatible receiver

4 x AA batteries or 2S transmitter battery w/JST plug

Aus <overskyrc.com/tsix-24ghz-dsm2-…0-model-memory-p-694.html>

Details